+44(0) 1234 567 890 info@domainname.com

Sunday 4 December 2011

Command Prompt errors & solution in Networking

22:38

Share it Please
Common run Command Errors

A]    ipconfig — Media disconnected
Issue
  1. Cable not connected
  2. The device on the other side is turned off
Solution
  1. Check with different cables
  2. Turn on the other devices
B]    Ipconfig — Windows IP configuration
Issue
  1. N/w card is disabled
Solution
  • Enable n/w card
C]    Ping — destination host unreachable
Issue:
  1. The device you are trying to ping is turned off
  • The device you are trying to ping is not a part of the network
Solution
  1. Check the IP address
  2. Disable firewall on both ends
  3. Disable and Enable the N/w card
D]    Ping–Request timed out
Issue:
  1. Destination devices has received the packets but not responding to it
Solution
  1. Disable firewall
  2. Disable/Enable network card
E]    Ping — error code 64 or ping transmit error
Issue
  1. Because of firewalls specially zone alarm
Solution
  1. Disable firewall and zone alarm

0 comments:

Post a Comment